![Sun Night Light System](https://www.gateautomation.co.uk/wp-content/uploads/2023/03/Sun-Night-Light-System-3-296x300.jpg)
![Revo plus night light system](https://www.gateautomation.co.uk/wp-content/uploads/2023/01/Revo-Right-Hand-295x300.jpg)
![](https://www.gateautomation.co.uk/wp-content/uploads/2015/12/130125172590_4plus_ray-300x300.jpg)
The Night Light System uses light to bring your Entrance to life.
Key Automation’s range of 24 Vdc Electromechanical motors for swing and sliding gates, have a fantastic light system built into the 14A control panel.
Built in LED light in the frontal part of motor body to light up gate entrance at night, ideal for security and safety . These are linked to a daylight sensor and will illuminate at dusk at low light intensity. When vehicles arrive or operated by radio control the lights will become brighter for a set period of time, finally switching off at dawn.
But this is only the start of the system. The gate controls can be linked to light systems down your drive and all over your garden.
![Ray Driveway Night Light System](https://www.gateautomation.co.uk/wp-content/uploads/2023/03/Key-Automation-Header-2-300x225.jpg)
![Halo Garage Door Night Light System](https://www.gateautomation.co.uk/wp-content/uploads/2023/03/Halo-Illuminated-Track-Door-Open-2-300x225.jpg)
![Garden night Light System](https://www.gateautomation.co.uk/wp-content/uploads/2023/03/Key-Garden-Lighting-2-300x233.jpg)
THE ADDED ADVANTAGES
EASY WIRING SUITABLE FOR DIY
All wiring and lights are in extra low-voltage 24Vdc. No danger of electric shocks and no risk of damage to the lights if incorrectly wired.
REDUCED ENERGY BILLS
Energy bills are considerably reduced: during the daylight the system stand-by consumption is less than 0,5W. During the night time the consumption of each light, on average, is between 2W and 4W (A+).
The annual energy cost of one light, turned on all night, every day of the year, would be about about 1.10 £/year *
* example of a single garden light, model STIK Down, with courtesy light at medium-high intensity, turned on constantly 12 hours per day, every day of the year, with a cost of energy equal to 0,33 £/KWh (average price in UK for 1 kWh for residential usage)
COMPLETELY AUTOMATIC
By connecting the night sensor QUADRO the lights of your garden will switch on automatically at sunset and they will automatically switch off at sunrise. it is possible also to control the lights also via radio with a remote control. In addition, you can dim the light intensity at night to the desired level, or to set different threshold for automatic activation of lights.
HOW IT WORKS
1 -PLAN YOUR GARDEN LIGHTING
Draw a simple map of your garden, choose the areas to illuminate and the desired type of light
Explore HERE all models of garden lights.
![Garden Light example](https://www.gateautomation.co.uk/wp-content/uploads/2023/03/Garden-light-layout-1024x819.jpg)
2 – CHOOSE THE TYPE OF SYSTEM: AUTOMATIC OR MANUAL
MANUAL
Choose the power supply BOXLED XS If you want a simple and cost effective system to replace your old AC lights and build a modern solution, up to 20 lights.
AUTOMATIC
Choose the following systems if you want an automatic system, that will turn on at sunset and will switch off during the daylight. You will also choose between 5 levels of intensity and divide the area up to 4 independent zones:
BOXLED (up to a 32 lights)
BOXLED XL (up to 64 lights).
Make sure to follow the instruction on this PAGE for a perfect connection between each garden light.
Explore HERE all power supply systems that we can offer.
3 – CHECK WHICH OPTIONAL ACCESSORIES YOU MAY NEED
Measure the total cable lenght you need. If you want to fix the lights on the soil you may need the STI1 fixing. If you want to avoid junction boxes you may evaluate che counterplates STI4 or STI3.
Learn how to use connectors to connect lamps, visit the DEDICATED PAGE to learn more.
![LED Connectors](https://www.gateautomation.co.uk/wp-content/uploads/2023/03/LED-Connectors-1024x723.jpg)