ELoop Kit Commercial


Get a Quotation Find a local installer Request a call back

ELoop Kit Commercial is a system that can be bolted to the ground to sense vehicles moving above. The unit is battery powered and comes complete with radio receiver to connect to your automatic gate system.


The e-Loop Commercial is a simple bolt-in replacement for automatic vehicle detection systems.  The e-loop Commercial can be used on most industrial gate installations due to its robust nature. It uses magnetic sensor technology to provide a cost-effective solution to automatic vehicle detection. The ELooc connects to your existing gate controller.

The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles.

These detections are transmitted to a nearby receiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode.

The sensors are installed on the surface of entry or exit passages using dynabolts, The ground units contain four replaceable Lithium batteries, and can withstand almost any vehicle.

Note: Gate or door controller must have a dedicated open input and auto close function enabled.


Installation in 3 simple steps;

  1. Code in e-Loop
  2. Secure e-Loop to the driveway
  3. Calibrate e-Loop…and you’re ready to operate in less than 15 minutes!



  • Magnetic field detection
  • Quick and easy installation
  • Compact profile – only 28mm high x 220mm diameter
  • Not effected by ground movement
  • 10600 mA battery giving up to 10 years battery life
  • High security 128 bit encryption
  • Receiver range 50 metres can accept 50 ground units
  • Made of high-impact plastic (10 tonne static load limit)

Additional information

Kit or Detector

Kit, Unit

You may also like…