The e-Loop Inground is buried replacement for automatic vehicle detection systems. The e-loop Inground can be used on most industrial gate installations due to its robust nature. It uses magnetic sensor technology to provide a cost-effective solution to automatic vehicle detection. The ELOOIG connects to your existing gate controller.
The Inground Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles.
These detections are transmitted to a nearby receiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode.
The sensors are installed into the road structure of entry or exit passages. The inground units can withstand almost any vehicle.
Note: Gate or door controller must have a dedicated open input and auto close function enabled.
Installation in 3 simple steps;
- Code in e-Loop
- Secure e-Loop to the driveway
- Calibrate e-Loop…and you’re ready to operate in less than 15 minutes!
Features
- Free exit only or Presence mode options
- Magnetic field detection
- Quick and easy installation
- Not effected by ground movement
- 14500 mA battery giving up to 6 -10 years battery life
- High security 128 bit encryption
- Receiver range 50 metres can accept 50 ground units
- Install into a 89 – 92 mm hole 65 – 70 mm depth
