This control board has been designed to control both swing-leaf and sliding-leaf gates for vehicle and pedestrian access
control.
• The E145S comes with safe zone technology – obstacle detection and reversal on contact. (when the optional encoder
is used).
• Green tech are solutions which save up to 90% of power compared to traditional systems ( thanks to the innovative
power supply switching systems.
• The board is able to automatically adapt to different input voltages (from 90V~ to 260V~), maintaining a constant output
voltage to accessories.
• Added connectivity – the new board supports BUS 2EASY and can be programmed from using a smart device with
Simply Connect or from USB key pre-programmed in Easy board
• Backward compatible – can be fitted to existing installations
• Can automatically find the deceleration and stop points during setup when using the safe coder with physical stops.
• In event of power failure the optional absolute encoder keeps the leaf position memorised
• It has embedded radio decoding in order to support only original FAAC transmitters (up to 1600 radio codes can be
stored). It also has a 5 pin connector for plugging existing radio controls.
• Built in timer (programmed via Simply Connect or from USB Key pre-programmed in Easy board)
• Traditional and Bus photocell inputs.
• Event log (via Simply Connect)
2 programming levels are available from the board (BASIC and ADVANCED), using buttons and LCD display, 3rd level with
Simply Connect of from USB Key pre-programmed in Easy board. This board also allows you the option to program using
a smart device with Simply Connect of from USB key pre-programmed in Easy board. With the Easy board programming
software you can choose whether to follow the wizard guided installation or customise your system in all its parts.

Technical Specifications

Mains primary power supply              –>                With power supply switching from 90V~ to 260V~; 50/60Hz

Power absorbed from mains              –>                  Stand by =4W  –  Sleep <2W  –     MAX~ 400W

MAX load for motors                          –>                  800W

Accessories power supply                  –>                 24V

MAX accessories current                    –>               +24V MAX 500 mA | BUS-2EASY MAX 500mA | LOCK (FAAC) 12V~/24V | LOCK (not FAAC) 24V 500mA (3A peak)

Operating ambient temperature       –>                 From -20oC to +55oC

Power supply safety fuses                  –>                 F1=F10AH250V

Work Time                                            –>                 Self learned through SETUP- (max 4 min and 10 sec)

Pause Time                                            –>                 Programmable (from 0 to 9 min and 50 sec)

Motor Power                                         –>                 Programmable on 50 levels

Connector inputs                                 –>                 Decoder/minidec/RP, X-com, XF433/868 Module, USB-A,
                                                                                     Input for safety edge in open and closing

Terminal board inputs                         –>                  Mains power supply from 90 to 260V~ inputs from IN1 to IN5, limit switch, BUS-2EASY

Terminal board outputs                       –>                   Flashing lamp, Motors, Electric lock (LOCK1 and LOCK2), OUT1 and OUT2 (programmable), Accessories power supply